|
In RF engineering, radial has two different meanings, both referring to lines which radiate from (or intersect at) a radio antenna. The use of the radial method is more common in North America, where the FCC and CRTC use it in mediumwave transmission planning and regulation. In Europe and Asia, the use of radials has fallen out of favor since the 1970s, and in many nations the radial antenna proof is only acceptable as an ancillary antenna proof. Canada and Mexico, due to lower population densities, never implemented the fully complete radial models that the US FCC did. The radial method has been falling out of favor for methods based on Cartesian coordinates. Cartesian methods require more CPU time (and memory) to compute, but are understood to more realistically represent antenna systems. The main importance of the radial methods is that a quick ''antenna system proof'' can be ''completed in less than 15 minutes'' (often in only 5 minutes) of a typical home computer's CPU time, regardless of antenna system complexity. The ITU over the past 50 years—in consideration of the various population densities of its members—officially mandates a minimum of 5 radials for an entire antenna system. == Usage == Although many broadcasting regulators around the world had to find some way of regulating Longwave and Mediumwave antenna patterns and power, only the FCC chose to implement the radial method in its fullest form. The FCC decision to fully implement radials evolved from 1925 to 1975. Technology had changed, and by the 1980s, computer terrain simulation of station interference and station patterns could be done on mainframes, typically using Cartesian or other non-radial methods. The FCC rules on radials were relaxed in stages from 1996 to 2013. It is expected that the 2013 ruleset for radials will probably endure without change for a decade. 抄文引用元・出典: フリー百科事典『 ウィキペディア（Wikipedia）』 ■ウィキペディアで「Radial (radio)」の詳細全文を読む スポンサード リンク
|